| WS-C2960X-24TS-L Specification | 
| General | 
| model info: | WS-2960X-24TS-L | 
| enclosure type | Rack-mountable - 1U | 
| Ports | 24 x 10/100/1000 + 4 x 1G SFP | 
| Network management Interface | 10/100 Mbps Ethernet (RJ-45) | 
| Available PoE Power | None | 
| Forwarding bandwidth(Gbps) | 108Gbps | 
| Maximum stacking number | 8 | 
| Stack Bandwidth | 80G | 
| Forwarding Performance | 71.4Mpps | 
| Switching bandwidth | 216Gbps | 
| Maximum active VLANs | 1023 | 
| MAC Address Table Size | 16K (default) | 
| CPU | APM86392 600MHz dual core | 
| RAM | 512 MB | 
| Flash Memory | 128 MB | 
| Status Indicators | Per-port status: Link integrity, disabled, activity, speed, and full duplex System status: System, RPS, Stack link status, link duplex, and link speed | 
| Expansion / Connectivity | 
| Console ports | USB (Type-B), Ethernet (RJ-45) | 
| Stacking cable | Optional | 
| Power Redundancy | Option (PWR-RPS2300) | 
| Voltage range (Auto) | 110V-240V | 
| Power Consumption Operational | 0.039KVA | 
| Miscellaneous | 
| Width | 17.5 Inches (44.5 cm) | 
| Depth | 14.5 Inches (36.8 cm) | 
| Height | 1.75 Inches (4.5 cm) | 
| Package Weight | 20.26 Pounds (9.19Kg) | 
| Weight | 8.9 Pounds (4.0Kg) | 
| Rack Mounting Kit | optional | 
| MTBF in hours | 622,350 | 
| Compliant Standards | IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS Prioritization
 IEEE 802.1Q VLAN
 IEEE 802.1s
 IEEE 802.1w
 IEEE 802.1X
 IEEE 802.1ab (LLDP)
 IEEE 802.3ad
 IEEE 802.3af and IEEE 802.3at
 IEEE 802.3ah (100BASE-X single/multimode fiber only)
 IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
 IEEE 802.1D Spanning Tree Protocol
 IEEE 802.1p CoS Prioritization
 IEEE 802.1Q VLAN
 IEEE 802.1s
 IEEE 802.1w
 IEEE 802.1X
 IEEE 802.1ab (LLDP)
 IEEE 802.3ad
 IEEE 802.3af and IEEE 802.3at
 IEEE 802.3ah (100BASE-X single/multimode fiber only)
 IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports
 | 
| System software / license | 
| System software | IOS LAN BASE | 
| license | NERGY-MGT-100-K9, EW-DO-100-DE | 
| features | RPS Support Jumbo Frames
 VLANS
 Voice Vlan
 VTPv2
 CDPv2
 LLDP
 802.3ad LACP
 PVST/PVST+
 802.1W/802.1S
 Port Fast/Uplink Fast
 port CoS Trust and Override
 Scheduling
 Priority Queuing
 Configure CoS Priority Queues
 Weighted Tail Drop
 DSCP transparency
 | 
| Network security | SSH, SSL and SCP RADIUS and TACACS+
 SNMPv3 crypto
 802.1x
 802.1x Accounting / MIB
 802.1x w/ port security
 802.1x w/Voice VLAN
 802.1x Guest VLAN
 802.1x VLAN assignment
 802.1x MAC-Auth Bypass
 BPDU/Root Guard
 Port Security
 Private VALN Edge
 Storm Control
 Block unknown unicast and multicast
 IGMP Snooping
 IGMP Filter/Throttle
 | 
| Management and Troubleshooting | Auto-MDOX TDR
 UDLD
 IP SLA Responder
 layer 2 / IP Traceroute
 SPAN
 RSPAN
 Express Setup
 Device Manager
 Cisco Network Assistant
 Smartports + Advisor
 Troubleshooting Advisor
 Drag-and-drop Cisco IOS Upgrade
 IP Address DHCP
 Autoinstall with saved configuration
 Configuration Replace
 DHCP Auto Image Upgrade
 DHCP Port Based Allocation
 Error Disable MIB
 | 
| Environmental Ranges | 
| Operating temperature up to 5000 ft (1500 m) | 23ºF to 113ºF | 
| Operating temperature up to 10,000 ft (3000 m) | 23ºF to 104ºF | 
| Short-term exception at sea level* | 23ºF to 131ºF | 
| Short-term exception up to 5000 feet (1500 m)* | 23ºF to 122ºF | 
| Short-term exception up to 10,000 feet (3000 m)* | 23ºF to 113ºF | 
| Short-term exception up to 13,000 feet (4000 m)* | 23º to 104ºF | 
| Storage temperature up to 15,000 feet (4573 m) | -13º to 158ºF | 
| Operating altitude | Up to 10,000 feet | 
| Storage altitude | Up to 13,000 feet | 
| Operating relative humidity | 10% to 95% noncondensing | 
| Storage relative humidity | 10% to 95% noncondensing |